Machinery and equipment

Machinery and equipment

Next
Previous
LITOSTROJ PD 50/12
Category: Other equipment
Manufacturer: Litostroj, IFE
Machine type: Portal crane, heavy duty
Model: PD 50/12
Year of construction: 2008

Description

Portal Crane capacity 50+12 tons, bridge width 34 meters, lifting height 15 meters, own weight 220 tons. Controlled from cabine, preparation for remote control.
 

Next
Previous
Litostroj, IFE
Category: Other equipment
Manufacturer: Litostroj, IFE
Machine type: Vibrating-shake out Cube, sieve, crusher
Model: -
Year of construction: 2008

Description

Portable vibrating cube for shaking out sand from big casting boxes.
Using such device you can avoid hand work and hammering the boxes with other tools.
Bttogniwon
Also parts of vibratory sieves IFE available.

Next
Previous
IMF 30 ton
Category: Other equipment
Manufacturer: IMF
Machine type: Continuous mixer
Model: 30 ton
Year of construction: 1999

Description

Durchlauf Wirbelmischer mit 30 Tonen/Std Kapazitaet, 3x Sand, 4x Kombinationen, Arm 5+3 meter, demontiert auf Lager.
 

Next
Previous
GOSTOL TST VK-4,5x5,5
Category: Lathes
Manufacturer: GOSTOL TST
Machine type: Shott Blasting Machine with crane
Model: VK-4,5x5,5
Year of construction: 2000

Description

Shott blasting machine-house with dimensions 4500x5500 mm, doors 5100 mm, crane hook 40 tons, 5x11kW Rutten turbines, possible 7 turbines, dedusting filter 30.000 m3/h, 40 kW.

The workpiece is hanged on rotating hook or put in the basket.

Next
Previous
GOSTOL K-2-1200-N/7,5
Category: Lathes
Manufacturer: GOSTOL TST
Machine type: Shott Blasting Machine with round table
Model: K-2-1200-N/7,5
Year of construction: 2005

Description

Shott blasting machine dia 1200 mm, height 300 mm, load 500 kg, 1xturbine 7,5 kW, dedusting 3000 m3/h, 4 kW
 

Next
Previous
Vibration station for hand molding
Category: Other equipment
Manufacturer: Giesserei Umwelt Technik
Machine type: Vibration station for hand molding
Model: -
Year of construction: 2007

Description

Vibration station 4,9x4,2 meters with 2 pallets. Vibration station is used in handmolding 
shops to vibrate and compact model and backing sand mixture to achieve superb surface properties 
of resin bonded sand molds. After filling fresh sand mixture, the vibratory table is shaking correct 
way for approx 10-20 seconds to achieve extremely compact and homogenious surface of mold. 
Own weight of vibration station 19 tons, own weight of pallets 8,8 tons, can be splitted 
in two halves. Weight capacity of device is 40 tons.

Next
Previous
Floor plates
Category: Other equipment
Machine type: -
Model: -
Year of construction: 1990

Description

T slotted floor fixation tables of various size available at 400 EUR/t.

Next
Previous
Clansmann CC112
Category: Lathes
Manufacturer: Clansmann
Machine type: Knock off hammer
Model: CC112
Year of construction: 2009

Description

Pneumatic knock off hammer for quick and stressless removal of risers from castings up to neck diameter of 200 mm.

Next
Previous
POTISJE PA50-6000 CM
Category: Lathes
Manufacturer: Potisje
Machine type: CNC horisontal lathe
Model: PA50-6000 CM
Year of construction: 2002

Description

POTISJE PA 50/6000 CM with cycling controlled unit Fagor 8055 T
YOM 2002, GENERALLY OVERHAULED BY FACTORY TO LIKE NEW CONDITION in MAY 2020

Working range

Distance between centres 6000 mm
Swing diameter above bed 1000 mm
Swing diameter above cross slide 700 mm
Diameter of face plate 850 mm
Tool cross section 50x25

Headstock and spindle

Spindle nose DIN 55021
No 11
Spindle bore 140 mm
Spindle diameter at from bearing 190 mm
Spindle rpm
Range I 1-128 min-1
Range II 129-315 min-1
Range III 316-800 min-1

Bed and slideways

Bed width 650 mm
Bil9c2ycum
Width of carriage 820 mm
Travel of cross slide 610 mm
Max.feed rate x/z axis 5m/sec

Main drive

Motor power * 28,5 KW
Transverse drive 2.49 KW
Longitudinal drive 4.36 KW

Tailstock

Quill diameter 140 mm
Quill taper 6

Maximum workpiece weight

Between centres with steady 6500 kg
Unsupported from one end 800 kg
Weight of machine 16000 kg
Maximum torque at face plate 5000 Nm

Accessories

Control unit FAGOR 8055 T
Work light 24V
Lubrication system
Protection door – total length of the back side the machine
– one mobil door on the front side of machine

Accessories

Coolant system
Manual tailstock with electrical displacement
Electro equipment for connection to the network 3*400V, 50Hz
Tool holder Multifix D1
Facing plate dia 850 mm with 4 chucks
Fixing head dia 475 mm
Three linetes
Chips conveyor
CE conformity

POTISJE PD2000-6000 CM
Category: Lathes
Manufacturer: Potisje
Machine type: Heavy duty lathe CNC
Model: PD2000-6000 CM
Year of construction: 2020

Maximum workpiece weight

  • Max.workpieces weight
  • Between centres with steady 16000 kg
  • Unsupported from one end 2500 kg
  • Weight of machine 32000 kg
  • Maximum torque at face plate 16000 Nm
  • The nominal power of the main drive is 51 KW (S1 mode).
  • Power of 71 KW is realized in S6 mode.

Accessories

Control unit FAGOR 8055 T
Work light 24V
Central lubrication system
Central lubrication system for longitudinal and cross support
Protection door – total length of the back side the machine
– one mobil door on the front side of machine

Accessories

Coolant system
Manual tailstock with electrical displacement
Electro equipment for connection to the network 3*400V, 50Hz
Tool holder prepared to hold the revolver head
Fixed steady with roller inserts ɸ 400-800mm
CE conformity

Headstock and spindle

Spindle nose DIN 55026
No 15
Spindle bore 210 mm
Spindle diameter at from bearing 260 mm
Spindle rpm
Range I 1-069 min-1
Range II 70-140 min-1
Range III 141-500 min-1

Working range

Distance between centres 6000 mm
Swing diameter above bed 2000 mm
Swing diameter above cross slide 1600 mm
Diameter of face plate 2000 mm
Tool cross section 60x40

Bed and slideways

Bed width 1120 mm
Width of carriage 1200 mm
Travel of cross slide 1000 mm
Max.feed rate x/z axis 5m/sec

Main drive

Motor power * 51/71 KW
Transverse drive 2.49 KW

Tailstock

Quill diameter 220 mm
Quill taper ME80

Beieacmvdp

Longitudinal drive 4.36 KW

Contact us
We use cookies to personalise content and ads, to provide social media features and to analyse our traffic.
We use cookies to personalise content and ads.